View our Deerwood Products

Deerwood Fasteners

Deerwood Fasteners

Face Frame Pocket Hole Screws Deerwood Fasteners knows face framing! We carry a comprehensive line of face frame and pocket hole screws. Our variety of head styles, drive styles, thread styles, and diameters provides you with a perfect screw for your application – whatever the application may be! Features : Pan Head in Phillips or Genuine Robertson® Square Drive recess with Fine Thread Type 17 Point , Pan Head in Genuine Robertson® Square Drive recess with Deep Thread Type 17 Point , Flat Top Pan (Fillister) heads with Genuine Robertson® Square Drive recess and Hi-Lo threads with Type-17 cutter point, Round Washer head with Recex® Square-Phillips combo drive with Deep Thread Type 17 Cutter Point, Type 17 self-drilling cutter point eliminates splitting and reduces need for pre-drilling, Genuine Robertson® Square Drive recess eliminates bit slippage and cam-out, Fine Threads: provides easy driving and maximum strength in hardwoods, Deep Threads: offers easy driving and maximum hold in soft woods and man-made materials,HI-LO Threads: designed to be the perfect solution for all applications.
Woodworking Assembly Screws Assembly Screws –Deerwood offers a large selection of assembly screws for almost all assembly applications. Various head styles, finishes, drives, points and thread styles are available to meet your specific requirements. Flat Heads – Flat top surface head designed to sit flush with the surface.Available in Phillips, Square or combo drive recesses with or without type-17 self-drill cutter points. Flat Heads with Nibs – Flat top surface head designed to sit flush with the surface. Nibs are added under the head to aid in countersinking and locking the screw in place. Available in Phillips, Square or combo drive recesses with or without type-17 self-drill cutter points. Trim Heads – Small flat heads designed to be used discreetly to attach moldings and trim.Available in Square recess drive fine thread. Round Washer Heads – Semi-elliptical top surface with a built in washer to provide a larger bearing surface.Available in Phillips\Square combo drive with or without type-17 self-drill cutter points or Woodmaster™ thread.
Hinge and Hardware Screws Hinge and Hardware – Smaller sized fasteners for attaching hinges, drawer slides and decorative hardware. Various head and thread options for all applications. Available in several different plating offerings for a decorative appearance. Oval Heads – countersinks like a flat head screw, but the head is slightly rounded to achieve that “finished” look. Available in Phillips drive recesses with coarse thread. Truss Heads – low profile semi-elliptical top surface with flat bearing surface. Available in Phillips or combo drive recesses in a type A (fine) or coarse thread. Modified Truss – low head profile with a larger load bearing surface. Available in Phillips drive recesses in a type A(fine) or coarse thread. Pan Heads – flat bearing surface, a semi-elliptical top surface, and cylindrical side surface.Available in Phillips, Square or combo drive recesses with or without type-17 self-drill points. Flat Heads – Flat top surface head designed to sit flush with the surface.Available in Phillips, Square or combo drive recesses with or without type-17 self-drill points. Flat Undercut Heads – head designed to seat properly in undersized countersink holes. Available in Phillips drive recesses with coarse thread.
Drawer Front Adjusting Screws Our drawer front adjusting Screws have an extra-large washer head for increased bearing surface and maximum hole coverage. The unique head design has been a timesaver for the professional cabinet maker for decades. Simply drill an oversized 5/16″ hole in the drawer box. Attach the drawer front by driving the drawer front adjusting screw through the box into the drawer front. The oversized hole allows for adjustments to be made to the drawer front thus insuring perfect alignment. These small details complete the professional look of your installation quickly and effortlessly. We have a special thread length on our drawer front adjusting screw to insure the thread engagement is in the drawer front only. This insures a tight fit and eliminates loosening. Available in Phillips drive and Recex® drive. Features: Deep Threads: offers easy driving and maximum hold in soft woods and man-made materials. Type 17 self-drilling point eliminates splitting and reduces need for pre-drilling. Available in a Modified Truss Phillips deep thread type 17 with an extra-large washer head. Available in a Modified Truss with Recex® Square-Phillips combo drive deep thread type 17 with an extra-large washer
Cabinet Installation Screws Our Truss head cabinet installation screws are the fasteners of choice for the professional cabinet installer. The large bearing surface of the head helps eliminate pull-through and allows the screw to be torqued to its maximum to insure a proper fit against the wall. Our painted head installation screws are specially coated to give you a professional finished look without the added expense associated with matching cover caps. Our screws are zinc plated prior to painting to insure optimum adhesion of the paint to the head. The procedure practically eliminates chipping and scratching of the paint to keep the fresh look. Deerwood offers these specialty fasteners in sizes and styles that accommodate most any application. Features: #10 body offers maximum shear loads and pullout strengths. Available in a Truss Head Phillips with a deep thread with or with a fine thread and self-drilling point for heavy duty steel studs. Available in a Truss Head with Recex® Square-Phillips combo drive with Deep Thread Type 17 Cutter Point. Available with painted heads. Available in lengths up to 3″.
Euro Screws Our Euro Screws are available in a nickel finish that perfectly matches the “European” hardware used on your project. These small screws have a Blunt Type B point that allows them to have maximum holding power in a pre-drilled hole. The aggressive deep thread design insures maximum holding power in MDF and Particle board as well as hardwoods. Features and Benefits: Available in Flat Head Pozi or Phillips Drive. Commonly used for drawer slides in European style cabinets. Blunt Type B point allows maximum holding power in a pre-drilled hole. Deep thread for maximum holding power in MDF, particle board and hardwoods
Machine Screws Every professional cabinet maker should have a supply of these screws. Deerwood’s machine screwsfeature a large truss head and a combination Phillips/Slotted Drive. Machine screws are zinc plated for a finished look with no oily residue. We also offer breakaway screws because inevitably you will be in the middle of finishing that last detail and find out you don’t have the correct size machine screw for mounting the hardware. Our breakaway screws are notched in ¼” increments to allow easy breaking of the unneeded length insuring you have the correct length every time. Features and Benefits: Truss Head with Phillips/Slot recess. Standard 8-32 thread. Truss Head Break-Away screws are notched at ¾”, 1”, 1-1/4”, and 1-1/2” lengths.
Confirmat Screws Ready-To-Assemble (RTA) and Knock-Down (KD) furniture can now be assembled with ease. Our Connecting Screws come with or without a hole for a Snap-On cover cap. These screws come with a Type-B thread style to insure maximum thread engagement in a pre-drilled hole. The extruded shoulder under the head creates a tight fit to insure proper alignment by the assembler. Also available with a sharp point. Features and Benefits: Flat Head Pozi drive. Flat Head Pozi drive with NIBS and with or without a hole for a snap on cap cover. Blunt Type B point allows maximum holding power in a pre-drilled hole. Deep thread for maximum holding power in MDF, particle board and hardwoods
Deck Screws Copperguard™ deck screws – great for pressure treated and redwood decks. Tan and Redwood color with Recex® Square-Phillips drive recess and our patented Woodmaster™ serrated thread design. Out performs major competitor’s brands. Rustguard™ deck screws – available in Phillips or Square drive recess. Type-17 self-drill point and self-countersinking nibs under the head. Silver/Gray in color. Available in 1 lb., 5 lb., deck pack and bulk. Seamaster™ stainless steel deck screws. Flat head and trim head designs. Available in either original Robertson square drive or Star drive. Self- Drilling Type-17 point and self-countersinking nibs. Trim heads work great for “pinch and pop” composite deck fastening. Limited painted head colors available as well.
Woodworking Accessories
Insert Screw Driver Bits Product Group

Want to order Deerwood Products? Contact us!

Category & Products